http://www.abxzone.com/forums/showthread.php?t=120818
Quote:
You have an AMD processor and VIA chipset in your current machine
You want to upgrade to an Intel-based system
When you swap out the hardware and try to boot, Windows will use the hard disk controller driver for your old chipset, and thus you will get a blue screen because it can’t load the OS. Oops.
The same can be true if you are moving from Intel to AMD, or even from AMD to AMD or Intel to Intel. It’s also possible that you are already using the default Windows hard disk controller, which means you don’t have to change anything. But just in case, do the following:Go to Device Manager
Expand the “IDE ATA/ATAPI controllers“
If you have an entry like “Standard AHCI 1.0 Serial ATA Controller” or “Standard Dual Channel PCI IDE Controller“, you’re all set. Just stop and upgrade your hardware, and you should be fine 99% of the time. If not, carry on to #4.
Right-click the non-standard disk controller entry and choose Properties -> Driver tab -> Update Driver. I’m talking controller entry here, not “ATA Channel o“, “Primary IDE Channel“, etc.
Choose the “Browse your computer/Let me pick” options until you get a list of compatible drivers. Select the default “Standard” driver:
– For a SATA drive: Standard AHCI 1.0 Serial ATA Controller
– For an IDE drive: Standard Dual Channel PCI IDE Controller
Click OK, and don’t reboot – shut down your computer and perform your hardware upgrade. If you reboot before your upgrade, Windows may automatically replace the standard driver with the custom one that you just tried to replace!
Before firing up your upgraded puter, be sure to connect your primary boot drive up properly and configure the BIOS with that drive as the first boot hard disk. Normally, I try to connect all the drives in the computer and configure the BIOS boot order and such exactly as it all was in the old computer.When you turn on your new monster, Windows should load and be able to access the boot hard drive just fine. It may take a bit longer than usual since Windows will be detecting your new hardware and trying to install drivers. Don’t freak out if everything doesn’t work at first – the important thing is to get the OS booted so you can install drivers and get the rest of your hardware configured and functioning properly.
http://www.techrepublic.com/blog/window-on-windows/get-rid-of-old-device-drivers-hidden-in-vista/867
The above like will help remove extra drivers from the Windows installation.
http://blog.doylenet.net/?p=91 This post explains more in detail
With a few hacks and tweaks you can successfully deploy the same syspreped image to both Intel and AMD hardware and uni-processor as well as multi-processor CPU’s.